SATO M10e Operator's Manual page 16

Section 2. Installation
Media Width Adjust Thumbscrews
PowerSwitch
Operator Panel
Configuration Panel
AC Input Connector
Interface Slot
EXT Connector
PCMCIA Card Slot
Page 2-4
PCMCIA Card Slot
Media Loaded LED
To turn power On or Off
To set up the various configurations and to display dispensing
quantity and the various alarms.
Potentiometers and DIP switches to configure the printer and
make setup adjustments.
To input 115V 50/60 Hz. Use the power cable provided.
Slot for installation of Plug-In Interface Module.
This is an external signal connector external control of print cycle.
Connector for Optional PCMCIA Memory Card.
PN 9001101 Rev. A
Configuration Panel
AC Input Connector
Interface
Card Slot
EXT Port
Connector
SATO M10e