SATO M10e Operator's Manual page 31

Section 3. Configuration
DISPLAY
This potentiometer is used to adjust the contrast of the LCD display for optimum viewing
under various lighting conditions.
PRINT
The PRINT potentiometer is used to adjust the amount of heat (i.e., power) applied to the head
for printing. It provides a continuous range of adjustment. Maximum print darkness is
obtained by turning the potentiometer all the way clockwise and a maximum counterclockwise
setting will give the lightest print.
NOTE: The PRINT potentiometer adjustment will affect the darkness in all of the
command code speed and darkness ranges.
SATO M10e PN 9001101 Rev. A Page 3-9