SATO M10e Operator's Manual page 41

CARD->MEMORY
COPY COPYING
CARD->MEMORYCOPY
COMPLETED
CARD COPY/FORMAT
XXXXXXX ERROR
MEMORY->CARDCOPY
PROGRAM
COPY START
YES
MEMORY->CARDCOPY
COMPLETED
CARD COPY/FORMAT
XXXXXXX ERROR
CARD FORMAT
YES
MEMORY FORMAT
YES NO
SATO M10e
3. Press the ENTER key to accept the selection. If Yes was
selected the copy process will start
4. Once the copy process is completed, press the ENTER key
to step the display.
5. If an error is encountered in the copy process, one of the
following messages will be displayed on the second line:
R/W Error
No Card Error
Mem Full Error Indicates that there is insufficient memory
This selection allows the user to copy the current firmware
Y/N
installed in the printer to a PCMCIA Memory Card.
1. Use the Cursor keys to step the cursor to desired setting. If
Yes is selected, the printer will enter the Card Copy mode. If
No is selected, the display will advance to the mode display.
2. Press the ENTER key to accept the selection. If Yes was
NO selected the copy process will start. If you select No, the
display will return to the previous selection.
3. Once the copy process is completed, press the ENTER key
to step the display.
4. If an error is encountered in the copy process, one of the
following messages will be displayed on the second line:
R/W Error
No Card Error
Mem Full Error Indicates that there is insufficient memory
Before a PCMCIA card can be used, it must be formatted.
NO
Note: Formatting a card destroys all data currently stored
on the card.
1. Use the Cursor keys to step the cursor to desired setting. If
Yes is selected, the printer will enter the Card Format mode.
If No is selected, the display will advance to the mode
display.
Before the internal Expanded Memory can be used, it must be
formatted.
Note: Formatting the Memory will destroy any stored data.
1. Use the Cursor keys to step the cursor to desired setting. If
Yes is selected, the printer will enter the Memory Format
mode. If No is selected, the display will advance to the mode
display.
PN 9001101 Rev. A
Section 3. Configuration
Indicates a Read/Write error occured
Indicates no card was recognized
available.
Indicates a Read/Write error occured
Indicates no card was recognized
available.
Page 3-19