KROHNE OPTIWAVE 5200 C/F Handbook page 53

OPTIWAVE 5200 C/F
Menu
No.
1.3.0
1.3.1
2. Supervisor menu
Menu
No.
2.0.0
2.1.0
2.1.1
2.1.2
03/2012 - 4001904901 - HB OPTIWAVE 5200 R01 en
Function Function description
HISTORY
ERROR RECORD A log of device errors. Press [>] to read the
errors. Press [
down the
list. Each error is identified by a code.
Press > again to show the number of
incidents and the time since the last
incident in days, hours, minutes and
seconds. For more data on errors,.
Function Function description
SUPERVISOR The supervisor can use this menu to
change parameters.
COMMISSION.
PARAMETERS This starts a quick set-up procedure
applicable to most applications. The
supervisor can give the tank height (TANK
HEIGHT), type of tank (TANK TYPE), output
function (OUTPU FUNC.), current output
range (RANGE I), 4 mA setting (SCALE
4mA), 20 mA setting (SCALE
20mA), error delay (ERROR
DELAY) and tag name (TAG
NAME).
EMP.SPEC.REC. Fixed and moving objects in the tank cause
interference
signals. Put them through this filter to
correctly measure the tank contents. A
quick set-up procedure will go through the
steps that follow:
Do you have a completely filled tank?
1
If the tank is full, it is not possible to
complete this procedure. The tank must
be partially filled or empty.
Please, activate moving parts! We
2
recommend that you switch on moving
equipment to filter all interference signals.
IIs your tank partially filled or empty?
3
If the tank is partially filled, the device must
include the tank contents when it filters the
signal.
MEAS.DISTANCE
4
If the tank is partially filled,
type in a distance shorter than
that between the flange and the
tank contents.
] or [ ] to scroll up or
www.krohne.com
OPERATION
Selection list
Read only.
Selection list
Yes [>], No [ ]
OK [>]
Partially [>], Empty [ ]
min-max:
0...tank height (2.3.1)
6
Default
Default
?
53