KROHNE OPTIWAVE 5200 C/F Handbook page 51

OPTIWAVE 5200 C/F
Values in menu items
Figure 6-3: Values in menu items
1 Menu item with values stored at this time (first screen)
2 Press [>] again to change the values. A cursor shows on the first digit.
3 Menu item name
4 Cursor on the selected digit
This is what you see when you select a menu item that has a value. The functions of the buttons are given in the table that follows:
Function of buttons in menu items that have values
Button
How to save settings changed in the supervisor menu (menu 2.0.0)
• When you have changed parameters in all the necessary menu items, press [^] to accept the new parameter.
• Press [^] to go back to the "STORE" screen.
• The device will ask you to save or cancel your settings. Press [ ] or [ ] to select STORE YES
or STORE NO. Press [^] to accept or reject the new settings.
The display goes back to Normal mode.
i
03/2012 - 4001904901 - HB OPTIWAVE 5200 R01 en
Description
Enter the menu item and see the value stored at this time.
•
Right
Enter the menu item configuration level to change the value.
•
Move the cursor to the next digit on the right. If the cursor is on the
•
last digit, press [>] again to go back to the first digit.
Enter / Accept the value and go back to the sub-menu.
Esc (Escape)
Down Decrease the digit value.
Up Increase the digit value.
www.krohne.com
OPERATION
Function
6
51