Data Logging With Dasnt2 - Ecom J2KNpro Tech Operating Instructions Manual

14.4. Data logging with DASNT2

In addition to data logger recordings the data could also be
transferred online via USB, Bluetooth (option) or via data interface to
the software "DASNT2". For the USB connection, a driver is
required. Software and USB driver are available free of charge from
the ecom website. The following transfer parameters must be set at
ecom-J2KNpro TECH ("Adjustments" /" Internal "/" USB "):
- 1200 Baud
- Protocol DAS
Please note the hints in the software manual.
14.5. Data processing with DAS5
To display and storage of measured values and measured value
gradients the software "DAS5" is available. With the help of a multi-
media card customer and measurement data can be exchanged
between software and instrument. An online connection to store
measured values and measured value gradients is possible with
USB or WLAN. For the USB connection, a driver is required.
Software and USB driver are available free of charge from the ecom
website. The following transfer parameters must be set at ecom-
J2KNpro TECH ("Adjustments" / "Internal " / "WLAN"):
- 1200-38400 Baud (setting as in the software "DAS5")
- Protocol Enhanced
For the wireless connection (WLAN), the following transfer
parameters have to be set at ecom-J2KNpro TECH ("Adjustments"
/ "Internal " / "WLAN"):
- Access Point = ON
- Auto Connect = ON
Please note the hints in the software manual.
pro
ecom- Page 43
J2KN TECH