Ecom J2KNpro Tech Operating Instructions Manual page 35

Second unit (adjustment with cursor keys):
-two different unit for one gas concentration possible
Ref. O
2
(for ppm and mg/m
-Input of O reference value O
2
Fuel type (press <OK> to access selection list):
-Modification of adjusted fuel type (e.g. by measurements at
combination plants)
Set clock (press <OK> to access setting menu):
-Correction of internal clock with cursor keys
Paper feed (press <OK> to activate paper feeding):
-Paper feed line by line
Tightness test (Start with <OK>):
-Leakage test of gas system of the
pro
ecom-J2KN
-Lock probe with a plug and start
test with <OK>
Internal (press <OK> to open menu):
-Further instrument settings:
Printout contrast (0..9)
(press <OK> to access input menu):
-Printer contrast adjustment
Recharging function
(<F1> for ON / <F4> for OFF):
-Recommended setting = OFF
Key beep (<F1> for ON / <F4> for OFF):
-Acoustical signal by key pressing
pro
ecom-
J2KN
3
units - Input after <OK> pressing):
2ref
TECH
TECH
Print contraste
Reload function
Key beep
Graphic menu
Probe heating
Quit with:
Low power mode
Language: English
F1 Hotkey
F4 Hotkey
Eff.(C)
RF-connect. only
USB
Bluetooth
WLAN
Pitot factor
Printout
Page 35