Data Logging With Dasnt2 - Ecom j2kn pro Operating Instructions Manual

12.4. Data logging with DASNT2

In addition to data logger recordings the data could also be trans-
ferred online via USB, Bluetooth (option) or via data interface to the
software "DASNT2". For the USB connection, a driver is required.
Software and USB driver are available free of charge from the rbr
website. The following transfer parameters must be set at ecom-
pro
J2KN ("Adjustments" /" Internal "/" USB "):
- 1200 Baud
- Protocol DAS
Please note the hints in the software manual.
12.5. Data processing with DAS5
To display and storage of measured values and measured value
gradients the software "DAS5" is available. With the help of a multi-
media card customer and measurement data can be exchanged
between software and instrument. An online connection to store
measured values and measured value gradients is possible with
USB or WLAN. For the USB connection, a driver is required. Soft-
ware and USB driver are available free of charge from the rbr web-
pro
site. The following transfer parameters must be set at ecom-J2KN
("Adjustments" / "Internal " / "WLAN"):
- 1200-38400 Baud (setting as in the software "DAS5")
- Protocol Enhanced
For the wireless connection (WLAN), the following transfer parame-
pro
ters have to be set at ecom-J2KN
("Adjustments" / "Internal " / "WLAN"):
- Access Point = YES
- Auto Connect = YES
Please note the hints in the software manual.
pro
ecom-J2KN Page 37