Heated Sampling System - Ecom J2KNpro Tech Operating Instructions Manual

4. Heated sampling system

Heated sampling system
Please note:
- Do not bend the tube
- Heated tube has to be cooled out after the
- Heated tube may not be folded too tight
- Do not put the heated tube in water
- Clean or replace PTFE filter regularly
By using a heated sampling system (option) is possible to measure
water-soluble substances (NO
hot gas filter protects the instrument especially for long-term
measurements from fouling. The maximum exhaust gas temperature
when using the heated sampling system is 500 ° C.
Page 10
measurement
(use the whole under case)
Direct connection at the front
of the J2KNpro TECH
and SO ) without washout. A built-in
2 2
pro
ecom-
J2KN TECH