Ecom J2KNpro Tech Operating Instructions Manual page 31

The setting for "Printer" can be changed as follows:
-select menu point and confirm with <OK>
-select desired setting with the curser keys
-confirm with <OK>
The setting for "Store" can be changed as follows:
select menu point and confirm with <OK>
activate storage function with <F1>
deactivate storage function with <F4>
By 'Start measurement' / <OK> the
evaluation of the measurement values
will be started. On the display the actual
mean values will be shown (will be
updated with new measurement values
/ switch to the actual values with cursor
keys <up/down>). It is possible to scroll
through the values with the cursor keys
<right/left>.
With
interrupt and with <F4> stop the
measurement.
After finishing the measurement time a protocol of the results with all
mean values can be printed (key <Print>).
pro
ecom-
J2KN
<F2>
you
TECH
O2
CO2
CO
Eff.
Losses
Exc. air
T.Gas
T.Air
Mean value
15:59 min
can
3.2 %
13.1 %
0 ppm
92.5 %
7.5 %
1.18
184.4 °C
20.3 °C
25.11.17
Page 31