DragonWave Horizon COMPACT Plus Product Manual page 86

DragonWave Inc.
76
get redundancy link monitor parameters
get redundancy link switch parameters
get redundancy mode
get redundancy override
get redundancy partner information
get redundancy standby enet state
get redundancy status
get rls
get rls link control
get rls link enable
get rls link monitor parameters
get rls make rsl
get rls port groups
get rls shutdown policy
get rls signal fault parameters
get rls status
get rsl threshold
get sessions
get snmp access mode
get snmp managers
get snmp set request
get snmp trap hosts
get snmp traps
get snmpv3 managers
get snmpv3 trap hosts
get snr threshold
get sntp
get sntp offset
get ssh server
get ssh server fingerprint
get ssl certificate status
get subnet mask
get super user
get sw inventory
get sw version
get synce config
get synce status
get syslog forwarding host
get syslog forwarding status
get system mode
get system speed
get system summary
get telnet access
get traffic statistics
get transmit power
get user accounts
get user session
get vlan tag
get vlan tagging
get web server
kill ssh sessions
list [ftp:file/directory/empty]
lo
ping [-w timeout][-n count][-t] abc.def.ghi.jkl
remove frequency indextable
reset [resource id]
save config [ftp:fileName]
save ecfmmib
save log [ftp:fileName]
save mib
save performance log [ftp:fileName]
save users [ftp:fileName]
Horizon Compact Plus Release 1.0.1
set aam [state <on/off>][inter mode <on/off>][max Tx-
Pwr <on/off>]
set aam eoam option [state <on/off>]
set aam link monitor parameters
set aam mode [system mode name/default]
set aam time [time in mseconds]
set admin user
set alarms counter [0]
set alignment [On | Off]
set antenna diameter [index of diameter]
set atpc config [on|off] [on|off] [0-10]
set bandwidth record logging[on | off]
set bandwidth record thresholds[thresh] [thresh]
[thresh] [thresh] [thresh] [thresh] [thresh]
[thresh] [thresh] [thresh]
set bandwidth utilization threshold [threshold] [time
limit]
set cos default value [0 - 7]
set cos ecfm flow mapping [off|{on
set cos expedite queue [on | off]
set cos qinq itag [protocol id]
set cos qinq otag [protocol id]
set cos queue cbs [committed burst size]
set cos queue cir [0 - 100, 0 - 100, 0 - 100, 0 - 100]
set cos queue mapping [1/2], ...
set cos type [cos_vlan | cos_qinq_itag |
cos_qinq_otag | cos_dscp | cos_mplsexp]
set cos wfq weight [weight]
set date time [dd/mm/yyyy hh:mm:ss:ms]
set default gateway [aaa.bbb.ccc.ddd]
set dropped frames threshold [threshold] [time limit]
set dw access[on | off]
set dynamic config change [on|off]
set ecfm [on | off | start]
set ecfm associate vlan-id {vlan-id | vlan-list} primary-
vlan-id <vlan-id(1-4094)>
set ecfm cc enable level [disable] {levelid | level-list}
[vlan {vlanid | vlan-list}]
set ecfm cc level {<level-id(0-7)> | level-list} {<default
[interval] [role]> | [vlan {<vlan-id(1-4094)> |
vlan-list}] [interval {ten-sec | one-min | ten-
min}]}
set ecfm ccm-unicast-mac <aa:aa:aa:aa:aa:aa>
set ecfm default-domain global levelid <(0-7)>
set ecfm default-domain vlan <integer(1-4094)>
([level<integer(0-7)>][mip-creation-criteria
{none | explicit | defer | default}][sender-id-
permission {none |chassis | manage | chassis-
mgt-address | defer }])
set ecfm disassociate vlan-id {vlan-id | vlan-list}
primary-vlan-id <vlan-id(1-4094)>
set ecfm domain <domain-name(1..20)> level <level-
id(0-7)> [delete]
set ecfm error-log [on | off] [size <entries(1-4096)>]
set ecfm mep archive-hold-time { <minutes(100-
65535) | default }
set ecfm mep crosscheck {on | off} levelid <level-id |
levellist> [vlan <vlan-id | vlanlist>] [switchname
<context_name>]
set ecfm mep crosscheck mpid <integer(1-8191)>
[delete|define] [vlan <integer(1-4094)>]
Wireless Ethernet Product User Manual – Volume 1
QC|Q1|Q2|Q3|Q4|Q5}]