DragonWave Inc.
40
Required Action
Create a new Administrator
account
Save the settings
Horizon Compact Plus Release 1.0.1
Steps
Sequence:
set admin user press Enter
The system responds:
Index:
Enter the <index #> where <index #> is from 1 to 50 and represents
one of the 50 available accounts.
The system responds:
UserName:
Enter the desired username for this account.
The system responds:
Verify UserName:
Re-enter the desired username for this account.
The system responds:
Password:
Enter the desired password for this account.
The system responds:
Verify Password:
Re-enter the desired password for this account.
The system responds:
User Accepted:
If the usernames or passwords do not match the system will
respond:
nak
Repeat for as many admin accounts as required.
save mib press Enter
The system responds:
MIB saved.
Note: the new account settings must be saved, otherwise they will be
lost after the next system reset. The user must perform the save mib
command in order to save the changes.
Wireless Ethernet Product User Manual – Volume 1
Need help?
Do you have a question about the Horizon COMPACT Plus and is the answer not in the manual?