Configuring Ip A; Band And Frequency Channels Ddress Values - DragonWave Horizon COMPACT Plus Product Manual

6.2.4 Configuring IP Address Values
When shipped from DragonWave, the Horizon Compact Plus is configured with a default IP address
(192.168.10.100) and subnet mask (255.255.0.0). The default address is used to communicate with the
Horizon Compact Plus for initial configuration purposes, such as entering the IP address that the unit will
have in the network to which it is to be connected. IP address information is entered in the following
manner:
Required Action
Configure the IP parameters
Once the system has reset, you may not be able to communicate with it without changing your laptop or
PC networking parameters to match the new IP address values programmed into the Horizon Compact
Plus.
Note that the reset system command is not always required when making configuration changes, but the
save mib command is always required. Commands that require a reset system will be indicated on the
screen.
Horizon Compact Plus Release 1.0.1
Steps
The IP parameters include the IP address, the subnet mask and default
gateway. The example below shows how to change the IP address, subnet
mask and default gateway.
Sequence:
set ip config press Enter
The system responds:
#Press 'Ctrl-X' to exit config process
#Press 'Enter' to retain previous value
Ip Address (192.168.10.100)
Subnet Mask (255.255.0.0)
Default Gateway (0.0.0.0)
Would you like to save MIB ? Enter Y(Yes) or N(No):y
Apply the setting to system immediately. This operation may cause the
loss of current connection!
Continue? Enter Y(Yes) or N(No)y
Mib saved successfully.
Config Name User Config
--------------- -------------
Ip Address : 172.16.18.100
Subnet Mask : 255.255.252.0
Default Gateway : 172.16.19.254
If you choose n (No) to the "Continue ?" prompt the response will be as
follows:
Continue? Enter Y(Yes) or N(No)n
Reset system for changes to take effect.
Mib saved successfully.
Config Name
---------------
Ip Address : 172.16.18.100
Subnet Mask : 255.255.252.0
Default Gateway : 172.16.19.254
The next time the system is reset the changes will be applied to the
system.
? 172.16.18.100
? 255.255.252.0
? 172.16.19.254
Running Config
--------------
172.16.18.100
255.255.252.0
172.16.19.254
User Config Running Config
------------- --------------
192.168.10.100
255.255.0.0
0.0.0.0
Wireless Ethernet Product User Manual – Volume 1
Initial Configuration
35