get default ipconfig
get dropped frames threshold
get dw access
get ecfm configuration-errors [vlan <vlan-id(1-4094)>]
[interface <interface-id>] [switchname
<context_name>]
get ecfm default-domain [switchname
<context_name>]
get ecfm domain [brief | domain-number(1-32)]
[switchname <context_name>]
get ecfm error-log [domain <domain-name(1..20)> |
levelid<level-id(0-7)>] [unaware | vlan <vlan-
id(1-4094)>] [switchname <context_name>]
get ecfm errors [domain <domain-name(1..20)> |
levelid <level-id(0-7)>] [switchname
<context_name>]
get ecfm frame delay buffer [brief] [one-way | two-
way] [level <level-id(0-7)>][unaware | vlan
<vlan-id(1-4094)>] [interface <interface-
number>][mac <peer-mac-address>]
get ecfm global information[switchname
<context_name>]
get ecfm loopback cache [brief] [level <level-id(0-
7)>][unaware | vlan <vlan-id(1-4094)>]
get ecfm maintenance-point local [mep | mip]
[interface [<interface-number>] | domain
<domain_name> | level<id(0-7)>]
get ecfm maintenance-points local detail
{mpid<mepid(1-8092)> | mac
<aa:aa:aa:aa:aa:aa>} [domain <domain_name>
| level<level-id(0-7)>] [unaware | vlan
<integer(1-4094)>]
get ecfm maintenance-points remote [domain
<domain-name(1..20)> | levelid <level-id(0-7)>]
get ecfm maintenance-points remote crosscheck
[mpid <id>] [domain <domain-name(1..20)> |
level <level-id(0-7)>] [unaware | vlan<integer(1-
8191)>][{domain <string(20)> | level <integer(0-
7)>}][{unaware | vlan<integer(1-4094)>}] [switch
<string (32)>]
get ecfm maintenance-points remote detail {mpid id |
mac <aa:aa:aa:aa:aa:aa> }[domain <domain-
name(1..20)> | level <level-id(0-7)> [unaware |
vlan<vlan-id(1-4094)>]] [switchname
<context_name>]
get ecfm mip-ccm-database [vlanid <vlan-id(1-4094)>]
[macaddress <aa:aa:aa:aa:aa:aa>] [port <port-
id>]
get ecfm port [{port <port-number>}] [switchname
<context_name>]
get ecfm service [brief | service-number(1-32) ]
[switchname <context_name>]
get ecfm statistics [port <port-number> [level <level-
id(0-7)>][<vlan-id(1-4094)>]] [switchname
<context_name>]
get ecfm traceroute-cache
get enet address
get enet config
get enet speed alarm enable port1 | port2
get enet speed
get enet status
get eoam dwi-msg mode
Horizon Compact Plus Release 1.0.1
Appendix A – CLI Command List
get eoam fault-management global information
get eoam global information
get frequency bank
get frequency file status
get haam
get haam eoam option
get haam status
get haam system modes
get haam wtr
get health
get http secure access [Admin|Noc|Super]
get hw inventory
get install type
get ip address
get leds
get licensed speed count
get licensed speed downgrade information
get log entries
get logging
get maximum frame size
get modem modulation
get modem statistics
get network loopback
get network management interface
get network protocol strict
get omni file crc
get optical transmitter state
get pause state
get peer authentication failure action
get peer authentication group key
get peer authentication status
get peer authentication type
get peer authentication unique key
get performance log
get performance log interval
get performance logging
get port eoam event-log [port <1-2>]
get port eoam event-notifications [port <1-2>]
get port eoam fault-management config port <1-2>
get port eoam fault-management mib-variable
response port <1-2>
get port eoam fault-management remote-loopback
[port <1-2>] [current-session | last-session]
[detail]
get port eoam local information [port <1- 2>]
get port eoam loopback capability[port <1-2>]
get port eoam neighbour information [port <1-2>]
get port eoam statistics [port <1-2>]
get programmed frequency
get qos
get qos policy
get queue utilization threshold
get radio band
get radio loopback
get radio statistics
get radio status
get radio transmitter state
get radius server deadtime
get radius server retransmit
get radius server timeout
get radius servers
get radius super user authentication
Wireless Ethernet Product User Manual – Volume 1
75
Need help?
Do you have a question about the Horizon COMPACT Plus and is the answer not in the manual?