User Accounts; Changing Thes; Table 6-1 User Account Levels - DragonWave Horizon COMPACT Plus Product Manual

Compact out-door-unit
Hide thumbs Also See for Horizon COMPACT Plus:
Table of Contents

Advertisement

DragonWave Inc.
36
6.2.5

User Accounts

User account names and passwords can only be configured using a Telnet session. Only the Super User
can change or add user account names or passwords. There are three user account levels as shown in
Table 6-1

Table 6-1 User Account Levels

Account
Level
Super User
1
noc
5
admin
50
No default noc or admin user accounts are configured when the Horizon Compact Plus leaves the factory.
Account names and passwords are case sensitive. There can be no duplication of names or passwords
across all user levels. A password cannot be the same as a user name.
6.2.6
Changing the Super User Name and Password
It is recommended that the default, or supplied, Super User name and password be changed as soon as
the Horizon Compact Plus system is aligned and operational.
Note: When you change the Super User name and/or password, record the new values in a safe place. If
you forget the new values, there is no way of retrieving them from the system. If the Horizon Compact
Plus is supplied with the DragonWave default access option, you will have to contact DragonWave to
arrange a Super User reset (24 hour support number 613-271-7010, or support@dragonwaveinc.com).
DragonWave Default Access
To change the Super User name and password use the CLI command set super user and press Enter.
Follow the prompts.
When the new name and password have been accepted enter the CLI command save mib and press
Enter. This will save the changes in non volatile memory. Failing to save the mib will result in changes
being lost in the event of a power failure, or system reset.
Horizon Compact Plus Release 1.0.1
Number of
Accounts
Available
Super User account has control over the usernames and
passwords for both the NOC and Admin accounts. Can
create backup file of NOC and Admin accounts onto an FTP
server, restore system settings and load new software
Network Operations Centre (NOC) accounts allow full
control over the configuration of the Horizon Compact Plus
system, including setting the frequency and IP address.
NOC accounts may also backup the Horizon Compact Plus
system settings to an FTP server and restore the system
settings from an FTP server. NOC accounts cannot create
or change user accounts, or issue any security related
commands (ex: set http secure access)
Admin accounts allow operational management of the
Horizon Compact Plus system but have some restrictions
for changes to configuration
Functionality
Wireless Ethernet Product User Manual – Volume 1

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Horizon COMPACT Plus and is the answer not in the manual?

Subscribe to Our Youtube Channel

Related Products for DragonWave Horizon COMPACT Plus

Table of Contents