ZeeVee ZyPer User Manual page 84

Commands
redundancy switchover
If there is an active slave, this command causes the existing master to become the slave
and the existing slave to become the master. The server does not restart or re-initialize any
other state, including any existing video and audio connections.
The IP address that is always assigned to the master. If the active slave becomes the
master, this IP address will then terminate at that system. Note that any existing TCP
connection will terminate and have to be reopened (to the new master).
Syntax
redundancy switchover
Parameters
none
Example
redundancy switchover
Success
Related Commands
set server redundancy
77