ZeeVee ZyPer User Manual page 69

Command
set encoder analog-audio-out
source
set encoder hdcp-mode
set decoder display-mode
set decoder display-size
set decoder analog-audio-out
source
set decoder hdmi-audio-out
source
set device ethernet-management
port
set device general name
set device ip dhcp link-local
set device ip static
set device rs232
set device send-ip-mcast-range
set device source-display
iconImageName
set device source-display
location
set device source-display
manufacturer
set device source-display model
set device source-display
serialNumber
Description
Sets the source of Analog audio output
for specified encoder
ZyPerUHD only)
Sets the hdcp compatibility at the encoder
side
Sets default decoder output to crop, stretch
or box
Set decoder output size to auto or manual
resolution. (Width, Height, FPS)
Sets the source of Analog audio output for
specified decoder
Sets the source of HDMI audio output for
specified decoder
Enables or disables the 1G Ethernet utiltiy
port for the specified device
Sets the name for the specified device.
Sets the specified device to DHCP or Link-
Local mode (ZyPer4K only)
Sets the specified device to static mode
(ZyPer4K only)
Sets the RS232 setttings for the specified
device
Sets allowable range of multicast
addresses for selected devices
only)
Sets the icon image for the specified
device.
Sets the location name for the specified
device.
Sets the manufacturer name for the
specified device.
Sets the model name for the specified
device.
Sets the serial number name for the
specified device.
62
Advanced Operation
(ZyPer4K and
(ZyPer4K only)
(ZyPer4K