ZeeVee ZyPer User Manual page 112

set device video-port
Selects active input port for ZyPer4K units with multiple inputs.
Syntax
set device id video-port arg
Parameters
id
Type: STRING or MAC Address
The name or MAC address of the encoder. String names are case sensitive.
arg
Type: STRING
Supply one of the following arguments.
argument
hdmi
display-port
hdsdi
component
composite
s-video
vga
Example
set device myEncoder1 video-port display-port
Success
Related Commands
set device analog-audio mode
set device general name
set device ip
set device rs232
set device source-display iconImageName
set device source-display location
set device source-display manufacturer
set device source-display model
set device source-display serialNumber
Description
Use the HDMI input
Use the Display-Port input
Use the SDI input port
Use component input. (Requires ZeeVee Hydra
cable)
Use composite input (Requires ZeeVee Hydra cable)
Use s-video input (Audio not supported)
Use vga input. (Requires ZeeVee VGA cable)
105
Commands
(ZyPer4K only)