Redundancy Configuration Instructions - ZeeVee ZyPer User Manual

Redundancy Configuration Instructions

To configure redundancy, follow the steps below. The secondary server must be running for
the redundancy fields to be visible in MaestroZ or the API.
Configuring redundancy through the API
Configuring the IP Address
1) Login to the main ZMP, or Master through telnet.
2) Issue the "set server redundancy all-servers" command to configure redun-
dancy
IE: set server redundancy all-servers virtual-ip address 172.16.5.239 mask 255.255.255.0
3) Use the "show server redundancy" command to review the redundancy con-
figuration and confirm the changes
4) Login to the Secondary server, or Slave,through telnet.
5) Use the "show server redundancy" command to review the redundancy con-
figuration and confirm the changes
Configure the preferred roles
1) Login to the Master ZMP through telnet.
2) Issue the "set server redundancy this-server" command to set the preferred
master and slave states on the server.
IE: set server redundancy this-server preferred-master true preferred-slave false
3) Use the "show server redundancy" command to review the redundancy con-
figuration and confirm the changes
4) Login to the Slave ZMP through telnet.
5) Use the "show server redundancy" command to review the redundancy con-
figuration and confirm the changes
Configuring redundancy through MaestroZ
1) Login through you Master ZMP MaestroZ with Chrome.
2) Open the Server Panel
3) Scroll down to the Redundancy fields
4) Set the fields listed below.
149
Commands