ZeeVee ZyPer User Manual page 133

Example
show device status USA4K since 20
device(d8:80:39:9a:e6:d);
device.gen; model=Zyper4K, type=encoder, name=USA4K, state=Up,
uptime=1d:4h:36m:37s, lastChangeId=5285
device.firmwareUpdate; status=idle, loadingFile=none,
percentComplete=0
device.hdmiInput; cableConnected=connected, hdcp=inactive, hdcp-
version=NONE, hdmi-2.0=yes, horizontalSize=3840, verticalSize=2160,
fps=30.00, interlaced=no
device.hdmiData; color=YUV_4:4:4, bits-per-pixel=8,
datarateMbps=615
device.edid; status=valid
device.autoEdid; decoder-name=not-enabled
lastChangeIdMax(109978);
Success
Related Commands
show device config
126
Advanced Operation