ZeeVee ZyPer User Manual page 39

3. The video wall editor will come back up onto the screen.
4. Enter the desired values, in pixels, for each bezel field: Bezel Top, Bezel Bottom,
Bezel Left, Bezel Right.
5. Once the desired values have been entered, click the Update button. This will save
the new settings.
6. Check the picture on the displays. Repeat steps 2 - 5 as necessary.
7. Note: Only the ZyPer4K allows bezel adjustment. Video walls with the ZyPerHD or
ZyPerUHD do not allow bezel adjustment.
32
Basic Operation