Source Config Page; Configuring Encoders And Decoders - ZeeVee ZyPer User Manual

When an encoder or decoder is connected to the network, the Management Platform
identifies each unit by its MAC address. This is the default setting. However, when dealing
with several units, it is much easier to identify a unit by a string name. It is also possible to
assign a preset image to each icon, set the network mode, RS232 settings, and more.
1. Login to the Maestro Z. Refer to
tion.
2. Click the Source or Displays tab at the left of the page.
ers (page 18)
3. All available encoders will be displayed under the Sources window.

Source Config Page

Configuring Encoders and Decoders

Accessing Maestro Z (page 12)
Joining Encoders to Decod-
20
Basic Operation
for more informa-