Unlinking Encoders And Decoders - ZeeVee ZyPer User Manual

As mentioned earlier, joining an encoder with a decoder that is already joined, will
replace the previous join operation. However, there may be situations where you want
to completely remove any source from being shown on a display. To do this, use the
Disconnect AV feature or Disconnect Joins.
1. Login to the Maestro Z. Refer to
tion.
2. On the Sources window, right-click on any Source. Select Configure Join and then
Disconnect AV.
3. Drag that source onto the Display that you would like to unlink
4. Alternately you can right click on the "Chain Link" icon and select "Disconnect Joins"
5. The display icon will change to show that it has been unlinked and no longer joined
with any encoder. (Yellow perimeter, small chain link icon is gone, icon returns to
default and name of joined source is gone)

Unlinking Encoders and Decoders

Accessing Maestro Z (page 12)
19
Basic Operation
for more informa-