ZeeVee ZyPer User Manual page 129

show device config
Displays device information for the specified device(s).
Syntax
show device config id select [since]
Parameters
id
Type: STRING or MAC Address
The identifier of the device. Either the full or portion of a string name or MAC
address can be supplied.
argument
all
encoders
decoders
since
This parameter is optional and can be specified to display units based on
the number of changes, using the lastChangeId value on each device.
However, if used, a lastChangeId value must follow. Supply the since
argument before the providing the lastChangeId value.
argument
since
Description
Displays configuration information for all available
devices.
Only encoders are displayed.
Only decoders are displayed.
Description
Required when using this parameter.
122
Advanced Operation