Using Mac Os X - ZeeVee ZyPer User Manual

Enter and run the put command, followed by the full name of the software file, as
8.
shown. Make sure to replace [version] with the version of the filename you are using.
For example:
ftp> put update_nuc_1.7.1.33348.zyper
9. Press the [ENTER] key. Information similar to the following will be displayed.
local: update_nuc_1.07.1.33348.zyper remote: update_
nuc_1.7.1.33348.zyper
229 Entering Extended Passive Mode (|||35257|).
150 Ok to send data.
100% |***********************************|
MiB/s 00:00 ETA
226 Transfer complete.
6994519 bytes sent in 00:00 (92.30 MiB/s)
10. Type the exit command to exit FTP.
ftp> exit
Andrews-MacBook-Pro:desktop Andrew$
11. Telnet to the Management Platform, as shown.
$ telnet 192.168.1.6
Trying 192.168.1.6...
Connected to 192.168.1.6
Escape character is '^]'.
zyper$
12. Use the update command to update the Management Platform. Once entered,
the Management Platform will reboot and the software will be updated. Note that
the connection will be lost, temporarily, during the update process.
zyper$ update server update_nuc_1.7.1.33348.zyper
Success
Server rebooting; connection will end
146
Appendix
6830 KiB 94.30