ZeeVee ZyPer User Manual page 104

set device send-ip-mcast-range
Sets allowable range of multicast addresses for selected devices.
Syntax
set device id send-ip-mcast-range first:ip last:ip
Parameters
id
Type: STRING or MAC Address
The name or MAC address of the encoder. String names are case-sensitive.
Can all use "all" or "encoders" as an ID option.
first:ip / last:ip
Type: Multicast Address
Supply the starting and ending multicast addresses in the allowable range.
Note: Allowable range is from 224.1.1.1 to 224.1.3.255
Example
set device encoders send-ip-mcast-range 224.1.1.25 224.1.2.125
Related Commands
set device analog-audio mode
set device general name
set device gig-ethernet-port mode
set device ip static
set device rs232
set device source-display iconImageName
set device source-display location
set device source-display manufacturer
set device source-display model
set device source-display serialNumber
97
Commands
(ZyPer4K only)