ZeeVee ZyPer User Manual page 109

set device source-display model
Assigns a model description for the specified device.
Syntax
set device id source-display model model
Parameters
id
Type: STRING or MAC Address
The name or MAC address of the device. String names are case-sensitive.
model
Type: STRING
The manufacturer's model numberof the device.
Do not use quotes when specifying this string value.
Example
set device myDecoder3 source-display model DVPSR210P
Success
Related Commands
set device analog-audio mode
set device general name
set device gig-ethernet-port mode
set device ip
set device ip static
set device rs232
set device source-display iconImageName
set device source-display location
set device source-display manufacturer
set device source-display serialNumber
102
Advanced Operation