Setting The Edid Mode - ZeeVee ZyPer User Manual

By default, Auto EDID mode is enabled. This means that the Management Platform will
compare the encoder EDID with the decoder EDID. If they are different, then the EDID
from the decoder (sink) will be used by the encoder (source). Setting the EDID Mode
affects all join modes: fast-switched, genlocked, and video-wall. Refer to the
command in the API Command Listing (page 61)
1. Login to the Maestro Z. Refer to
tion.
2. Click the Server tab at the left of the page.
3. EDID information will appear in the Server window under the Status information. You
may need to scroll down in the window to see the EDID information.

Setting the EDID Mode

section for more information.
Accessing Maestro Z (page 12)
41
Basic Operation
join
for more informa-