ZeeVee ZyPer User Manual page 73

create video-wall
Creates an empty 2x2 video wall. Once created, the new video wall will be listed under the
Display Config menu within the built-in Maestro Z.
Use the set video-wall-encoder command to assign a source encoder to the
wall. To modify the size of the video wall and/or control bezel parameters, use the
set video-wall command.
Refer to Creating Video Walls (page 28)
built-in Maestro Z.
Syntax
create video-wall name
Parameters
name
Type: STRING
The name of the video wall. The name of the video wall cannot exceed
255 characters in length. Names are case-sensitive.
Example
create video-wall myWall
Success
Related Commands
delete video-wall
set video-wall
set video-wall-decoder
set video-wall-encoder
for information on managing video walls in the
66
Advanced Operation