ZeeVee ZyPer User Manual page 116

set responses rs232-term-chars
Specifies the termination character for an RS232 string. The default string is "\n\r".
Any character in the termination string causes the response-string to terminate and be
placed into the response-string ring buffer.
This string is optional. If it is not specifed, then the string is empty and each low-level
response is handled as a separate response.
Syntax
set responses id chr
Parameters
id
Type: STRING or MAC Address
The name or MAC address of the decoder. String names are case-sensitive.
chr
Type: STRING
The specified string.
Example
set responses decoder-2 rs-232-term-chars "\r"
Success
Related Commands
set device rs232
109
Advanced Operation