Table of Contents
Advertisement
Appendix
A.4 Default Settings
A.4.5
Default Display
4-line Display
The following selection is available as start page which may be configured. Parameter 640Start image DD
allows to select which of the available default displays will be displayed in normal mode.
Figure A-11
Spontaneous Fault Indication of the 4-Line Display
The spontaneous annunciations on devices with 4-line display serve to display the most important data about
a fault. They appear automatically in the display after pick-up of the device, in the sequence shown below.
Relay PICKUP:
PU Time=:
Trip time=:
Fault locator
282
Default displays
A message indicating the protective function that last picked up
Elapsed time from pick-up until drop-off
Elapsed time from pick-up until the first trip command of a protection function
Fault distance d in km or miles
SIPROTEC, 7VK61, Manual
C53000-G1176-C159-3, Release date 05.2009
Advertisement
Table of Contents
