Table of Contents
Advertisement
Project
Content-wise, a project is the image of a real power supply system. Graphically, a project is represented as a
number of objects which are integrated in a hierarchical structure. Physically, a project consists of a number of
directories and files containing project data.
Protection devices
All devices with a protective function and no control display.
Reorganizing
Frequent addition and deletion of objects results in memory areas that can no longer be used. By reorganizing
projects, you can release these memory areas again. However, a cleanup also reassigns the VD addresses.
The consequence is that all SIPROTEC 4 devices have to be reinitialized.
RIO file
Relay data Interchange format by Omicron.
RSxxx-interface
Serial interfaces RS232, RS422/485
SCADA Interface
Rear serial interface on the devices for connecting to a control system via IEC or PROFIBUS.
Service port
Rear serial interface on the devices for connecting DIGSI (for example, via modem).
Setting parameters
General term for all adjustments made to the device. Parameterization jobs are executed by means of DIGSI
or, in some cases, directly on the device.
SI
→ Single point indication
SI_F
→ Single point indication transient → Transient information, → Single point indication
SICAM SAS
Modularly structured station control system, based on the substation controller → SICAM SC and the SICAM
WinCC operator control and monitoring system.
SICAM SC
Substation Controller. Modularly structured substation control system, based on the SIMATIC M7 automation
system.
SIPROTEC, 7VK61, Manual
C53000-G1176-C159-3, Release date 05.2009
Glossary
325
Advertisement
Table of Contents
