• Remove the boards and set them on the grounded mat to protect them from ESD damage. In the case of
the device variant for panel surface mounting, please be aware of the fact that a certain amount of force is
required in order to remove the C-CPU-2 module due to the existing plug connectors.
• Check the jumpers according to Figures 3-5 to 3-13 and the following information. Change or remove the
jumpers if necessary.
Figure 3-3
Figure 3-4
SIPROTEC, 7VK61, Manual
C53000-G1176-C159-3, Release date 05.2009
Front view with housing size
Front view with housing size
1
/
after removal of the front cover (simplified and scaled down)
3
1
/
after removal of the front cover (simplified and scaled down)
2
Mounting and Commissioning
3.1 Mounting and Connections
187