Settings - Siemens Siprotec 7VK61 Manual

Functions
2.1 General
reclosure does not have a general pickup signal for starting the action times, select ... Trip without T-
action.
For the trip circuit supervision set at address 140 Trip Cir. Sup. the number of trip circuits to be monitored:
1 trip circuit, 2 trip circuits or 3 trip circuits, unless you omit it (Disabled).

2.1.1.3 Settings

Addr. Parameter
103 Grp Chge OPTION
106 VT CONNECTION
107 CT CONNECTION
110 Trip mode
126 Back-Up O/C
133 Auto Reclose
134 AR control mode
135 Synchro-Check
137 U/O VOLTAGE
139 BREAKER FAILURE
140 Trip Cir. Sup.
26
Setting Options
Disabled
Enabled
3phase
1phase
NO
YES
NO
3pole only
1-/3pole
Disabled
TOC IEC
TOC ANSI
TOC IEC /w 3ST
1 AR-cycle
2 AR-cycles
3 AR-cycles
4 AR-cycles
5 AR-cycles
6 AR-cycles
7 AR-cycles
8 AR-cycles
ADT
Disabled
Pickup w/ Tact
Pickup w/o Tact
Trip w/ Tact
Trip w/o Tact
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
enabled w/ 3I0>
Disabled
1 trip circuit
2 trip circuits
3 trip circuits
Default Setting
Disabled Setting Group Change Option
3phase Voltage transformer connection
YES Current transformer connection
3pole only Trip mode
Disabled Backup overcurrent
Disabled Auto-Reclose Function
Trip w/ Tact Auto-Reclose control mode
Disabled Synchronism and Voltage Check
Disabled Under / Overvoltage Protection
Disabled Breaker Failure Protection
Disabled Trip Circuit Supervision
C53000-G1176-C159-3, Release date 05.2009
Comments
SIPROTEC, 7VK61, Manual