Keithley 194 Instruction Manual page 149

PERFORMANCE VERIFICATION
5.7.1 HP-85 Verification Program
Enter and run the program below to verify Model 194 ac-
curacy with a Hewlett-Packard Model 85 computer.
COMMENTS
Place 194 in
remote.
Clear CRT.
Send device
Cl&X
Prompt for
channel number.
Input channel
n&ber.
60 IF 1:: <I. !ClE 1::: >1' THE,., 40 If not 1 or 2 go
f&at.
Loop
for all four
Interval, samples
(16 bit).
Read verification
limits.
Prompt for veri-
fication voltage.
Wait for operator
signal.
Get reading
from 194.
Flag error if out
of limits.
Interval, samples
(8 bit).
Get reading
from 194.
Flag error if out
of limits.
Loop back for
next range.
Data statements
with verification
limits.
5-4