Damage Types - Ceramic Cooktops; Testing The Auto-Boost Feature; Table 010-9: Programming Mode - Miele KM 5773 Technical Information

KM 5773
Programming function
P17 Model programming
P18 Pot sensing
P19-P21 Vacant
P22 Light ring
P28
Cooling-fan check
(P8.)
P29
Buzzer check
(P9.)

Table 010-9: Programming Mode

1
S1 can only be selected with auto-boost feature activated (programming function P12 set to
S1, S2 or S3).
2
Switching off auto-boost is not possible if power level 6 is set at switch-on (P10 set to S1).
3
When the timer is switched on it initially shows 00 in the display. When the + or - touchpads
are pressed, the most recently set time is displayed. This can then be changed as desired
by again touching the + or - touchpads.
4
This function is used in production only. Do not change it in service programming.
5
Service programming only. S1 or S2 can be set but not saved.
Save and quit:
Press and hold the main switch  touchpad for 2 seconds until the displays
switch off.
Quit without saving:
Touching any controls not associated with programming will end the
programming mode and none of the modifications will be saved.
4.2

Damage Types - Ceramic Cooktops

See DTD 26-0000.
4.3

Testing the Auto-Boost Feature

1. Switch on the cooktop.
2. Switch a burner on together with the auto-boost function.
3. Activate the controls until the desired power level is reached.
Options and states
S0
S1
S2 Not for models in this DTD
S3
S4
S12 KM 5773
S11
S15
S16 Not for models in this DTD
S17
S18
S1
S0 Light ring off
S1 Light ring on
S0 Fan off
Fan on at level 1 (half
S1
5
speed)
Fan on at level 2 (max.
S2
speed)
S0 Buzzer off
S1 Buzzer on
47
Technical Information
Standard setting
S12. Electronics
supplied as spare
parts: S0. If a
setting other than
S12 is selected,
this will result in
functional faults
and/or fault
indications when
the cooktop is
switched on.
S1. This setting is
determined by the
model
programming (P17)
and cannot be
changed.
4
S1
S0
S0 (S1 cannot be
saved)