Technical Information
5. Remove the induction coil from the mounting bracket.
Figure 010-12: Induction Coil Connections
1 T25 screws
2 PTC wiring harnesses
4.8
Induction-Coil Mounting Bracket Removal
1. Remove the cooktop and disconnect it from power; see Section 010-4.4.
2. Remove the ceramic surface; see Section 010-4.5.
3. Remove the selection electronic; see Section 010-4.6.
4. Remove all induction coils; see Section 010-4.7.
5. Lift the mounting bracket up and disconnect the two ground wires from its
underside.
6. Remove the mounting bracket from the cooktop base.
4.9
Power Electronic (1A3/2A3/3A3) Removal
1. Remove the cooktop and disconnect it from power; see Section 010-4.4.
2. Remove the ceramic surface; see Section 010-4.5.
3. Remove the selection electronic; see Section 010-4.6.
4. Remove all induction coils (see Section 010-4.7).
5. Remove the induction-coil mounting bracket; see Section 010-4.8.
6. Disconnect all connections from the appropriate power electronic.
50
KM 5773