Auto-Boost Feature Cannot Be Activated Via Minus - Touchpad; Auto-Boost Feature Activated Via Plus + Touchpad; Power Level 6 Shown When Burners Are Switched On; Not All Power Level Indicators Light Up At Switch-On - Miele KM 5773 Technical Information

Technical Information
The auto-boost feature cannot be deactivated in customer programming.
Cause:
The power level at switch-on has been set to 6 in customer programming.
Remedy:
1. Program the setting of the power level at switch-on to 0 (refer to Section 010-
4.1).
2. Deactivate auto-boost (refer to Section 010-4.1).
3.33

Auto-Boost Feature Cannot Be Activated via Minus - Touchpad

Cause:
Access was changed in customer programming. Customer programming offers
the options "Auto-boost via minus - touchpad", "Auto-boost via plus + touchpad",
"Auto-boost at every switch-on", or "Auto-boost not activated".
Remedy:
Modify the programming (refer to Section 010-4.1).
3.34

Auto-Boost Feature Activated via Plus + Touchpad

Cause:
Access was changed in customer programming. Customer programming offers
the options "Auto-boost via minus - touchpad", "Auto-boost via plus + touchpad",
"Auto-boost at every switch-on", or "Auto-boost not activated".
Remedy:
Modify the programming (refer to Section 010-4.1).
3.35

Power Level 6 Shown When Burners are Switched On

Symptom:
When a burner is switched on, power level 6 is immediately displayed.
Cause:
Setting was changed in customer programming.
Remedy:
Modify the programming (refer to Section 010-4.1).
3.36

Not All Power Level Indicators Light Up at Switch-On

Cause:
Wrong model programming.
Remedy:
Check the model programming and program the correct model as necessary
(refer to Section 010-4.1).
3.37

Long Signal Tone at End of Timer Function

Symptom:
Long nonstop signal tone (4 minutes) at end of timer operation.
Cause:
Long signal tone was set in customer programming.
Remedy:
38
KM 5773