KM 5773
Electronic fault.
Remedy:
Replace the selection electronic (A1); refer to Section 010-4.6.
3.24
Fault Code FE 80
Cause:
Incorrect model version programmed.
Remedy:
Program the correct model version; see Section 010-4.1.
Cause:
Filter/control electronic fault.
Remedy:
1. Disconnect and reconnect power.
2. Replace the filter/control electronic, if necessary; see Section 010-4.10.
3.25
Fault Code FE 81
Cause:
Faulty programming.
Remedy:
Reset all settings back to their factory settings; refer to Section 010-4.1.
Cause:
Electronic fault.
Remedy:
Replace the selection electronic (A1); refer to Section 010-4.6.
3.26
Fault Code FE 84
Cause:
Electronic fault.
Remedy:
1. Replace the filter/control electronic on the side where FE is displayed; refer to
Section 010-4.10.
2. Replace the power electronic on the side where FE is displayed; refer to
Section 010-4.9.
3.27
Fault Code FE 85
Cause:
Connection cable between left filter/control electronic (N1) and left power
electronic (1A3) defective.
Remedy:
Note:
As a safety feature, when a hardware fault is registered, the cooktop shuts itself
off automatically.
Check connection cable (including plugs) between the left filter/control electronic
(1N1) and the left power electronic (1A3), and replace it as necessary.
Cause:
Electronic fault.
35
Technical Information