Miele KM5840 Installation Instructions Manual
Miele KM5840 Installation Instructions Manual

Miele KM5840 Installation Instructions Manual

Miele km5840: install guide

Advertisement

Installation Instructions

KM5840, KM5860, KM5880
en-CA
Installation, repair and maintenance work should be performed by
a Miele authorized service technician in accordance with national
and local safety regulations and the provided installation instructions.

Advertisement

Table of Contents
loading

Summary of Contents for Miele KM5840

  • Page 1: Installation Instructions

    Installation Instructions KM5840, KM5860, KM5880 en-CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions.
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS WARNING- When using your appliance follow basic precautions, including the following: Read all instructions before installation or use to prevent injury and appliance damage. This appliance conforms to all uniform safety codes and regulations. Keep these operating instructions in a safe place and pass them on to any future user.
  • Page 3 Technical safety Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. Be sure your appliance is properly installed and grounded by a qualified technician.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS Safety DO NOT TOUCH THE COOKING AREA OR THE VICINITY AROUND THE COOKING AREA - During operation, the cooking area and its surroundings will get hot and can cause burns. When the cooktop is shut off, the surface may remain hot enough to cause harm, even though the glow is not visible through the dark glass.
  • Page 5 Make certain that the power cords of small appliances do not come in contact with the appliance. The insulation of the cable could become damaged. Danger of electric shock! The control panel and/or the areas around the cooktop (the cooktop frames or surrounding (in the case of facet cooktops) may become hot due to the following factors: operating time,...
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS Any spills should be removed as quickly as possible to prevent them from burning on and becoming difficult to remove. Aluminum cookware or cookware with aluminum base can cause shiny metallic spots. These spots can be removed with ceramic glass or stainless steel cleaner (see "Cleaning and Care").
  • Page 7: Important Installation Safety Instructions

    However, under certain conditions it may be possible for installation in these applications. Please contact the Miele Technical Service Department with specific requirements. You must ensure the power cable...
  • Page 8: Safety Distances Above The Appliance

    IMPORTANT INSTALLATION SAFETY INSTRUCTIONS Safety distance from divider Installation of a divider under the cooktop is not required. If a divider is fitted under the cooktop, the distance between the upper edge of the work surface and the upper edge of the divider must be at least 4 ½...
  • Page 9 IMPORTANT INSTALLATION SAFETY INSTRUCTIONS Safety distances to the sides of the appliance The appliance should only be installed as shown in the illustrations, while maintaining the required safety distances shown. Do not install the appliance between two tall cabinets, this is a fire hazard. 1 5/8"...
  • Page 10: Installation

    Safety distance from the wall covering If a wall covering is installed, a minimum safety distance must be maintained between the countertop cut-out and the covering, since high temperatures can damage these materials. If the covering is made of a combustible material (such as wood), the distance between the countertop cut-out and the wall covering must be a minimum of 2"...
  • Page 11: Tiled Surfaces

    Installation Frame/Facet Cooktops Sealing The appliance must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the appliance provides a sufficient seal for the countertop. If the appliance is sealed into position, the countertop or appliance could be damaged if it needs to be removed for maintenance or service.
  • Page 12: Installation Dimensions

    Installation dimensions KM 5840 Spring clips Front Installation height Connecting cable, Length = 56 11/16" (1440 mm) Rating label...
  • Page 13 Installation dimensions KM 5860 Spring clips Front Installation height Connecting cable, Length = 56 11/16" (1440 mm) Rating label...
  • Page 14 Installation dimensions KM 5880 Spring clips Front Installation height Connecting cable, Length = 56 11/16" (1440 mm) Rating label...
  • Page 15 Installation The exact positions of the spring clamps and the support bars (for beveled cooktops only) are shown in the "Installation dimensions" of each unit. Facet cooktops: A special sealing strip ensures the slip-proof seating of the cooktop in the cutout. The gap between the frame and the countertop will narrow after a little time has passed.
  • Page 16 Granite countertop Strong double-sided adhesive tape and silicon are required for installation (not included). ^ Using adhesive tape spring clips and the securing strips (for facet cooktops only) The spring clips and the securing strips must be on or flush with the top edge of the cooktop.
  • Page 17 Installation Insert the cooktop ^ Feed the power cord down through the cut-out. ^ Place the cooktop lightly on the spring clips. ^ With a hand on each side of the appliance press down evenly on the edges until it clicks into position. When doing so make sure that the appliance seal sits tightly on the countertop to ensure it is sealed...
  • Page 18: Electrical Connection

    CAUTION: Before installation or servicing, disconnect the power supply by either removing the fuse, shutting off the main power or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards.
  • Page 19 Alteration rights reserved / 4210 M.-Nr. 07 844 710 / 01 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.

This manual is also suitable for:

Km5860Km5880

Table of Contents