Ceramic Surface - Miele SmartLine CS 7101 Operating And Installation Instructions

Ceramic surface

Risk of damage from sharp and poin-
ted objects!
Do not clean the area between the
ceramic surface and the worktop
with sharp, pointed objects.
Not all soiling and residues can be
removed using a solution of wash-
ing-up liquid.
An invisible film can develop that can
lead to discolouration of the ceramic
glass. This discolouration cannot be
removed.
Clean the ceramic surface regularly
with a suitable ceramic cleaning
agent.
 Remove any coarse soiling with a
damp cloth and more stubborn soil-
ing with a scraper blade suitable for
use on glass.
 Then clean the ceramic glass surface
with the Miele ceramic and stainless
steel hob cleaner (see "Optional ac-
cessories") or with a commercially
available ceramic glass cleaner ap-
plied with kitchen paper or a clean
cloth. Do not apply the cleaner while
the hob is still hot, as this can result
in marking. Please follow the cleaning
agent manufacturer's instructions.
 Finally wipe the ceramic surface with
a damp cloth and polish with a soft,
dry cloth.
Residues can burn onto the hob the
next time it is used and cause damage
to the ceramic surface. Ensure that all
cleaning agent residues are removed.
Cleaning and care
 Spots caused by limescale, water
and aluminium residues (spots with a
metallic appearance) can be removed
using Miele's ceramic and stainless
steel hob cleaner.

Danger of burning.
Wear oven gloves when removing
residues of sugar, plastic or alu-
minium foil from a hot ceramic sur-
face with a scraper blade.
 Should any sugar, plastic or alu-
minium foil spill or fall onto the hot
ceramic surface while it is in use,
switch off the cooking zone.
 Then carefully scrape off these
residues immediately whilst they are
still hot, using a scraper blade suit-
able for use on glass.
 Afterwards, clean the ceramic surface
in its cooled state, as described
above.
29