8356 Genu Direxa - Otto Bock Genu Direxa 8356 Instructions For Use Manual

4 Handling
INFORMATION
► The daily duration of use and period of application are generally determined by the physi­
cian.
The initial fitting and application of the product must be carried out by qualified personnel.
►
► Instruct the patient in the handling and care of the product.
► Instruct the patient to see a physician immediately if any exceptional changes are noted (e.g.
worsening of the complaint).
4.1 Selecting the Size
1) Measure the circumference of the thigh 15 cm above the center of the patella.
2) Measure the circumference of the lower leg 15 cm below the center of the patella.
3) Determine the size of the brace (see size chart).
4.2 Fitting and Application
NOTICE
Use of a worn or damaged product
Limited effectiveness
► Before each use, check the product for functional reliability and for possible wear or dam­
age.
► Do not continue using a product that is no longer functional, or that is worn or damaged.
4.2.1 Adaptation
The joint bars are fitted individually by trained qualified personnel.
4.2.2 Application
CAUTION
Use with heat-sensitive skin
Skin irritation due to overheating
► Do not use the product in case of a known heat allergy.
► Do not continue to use the product if skin irritation occurs.
CAUTION
Incorrect or excessively tight application
Risk of local pressure and constriction of blood vessels and nerves due to improper or exces­
sively tight application
Ensure that the brace is applied properly and fits correctly.
►

8356 Genu Direxa

> Open all hook-and-loop closures on the brace.
> The patient is sitting on the front edge of a chair.
1) Hold the brace on both sides with the donning loops and pull it over the knee until the patella
cutout is centered on the patella (see fig. 1 and see fig. 2).
2) Close the hook-and-loop straps first below and then above the patella (see fig. 2 and see
fig. 3).
10