Control Data 3170 Installation Handbook page 61

I
Release value: ASCII equals 0 on the MSOS COSY tape and the MSOS binary source
tape.
Decks and COSY numbers:
DELETE/
CIa DECK/
DELETE/
EXEC DECK/
DELETE/
JOBCTL DECK/
DELETE/
APCV50 DECK/
267
pI, p2
6
pl,p2
22
pl,p2
94
pl,p2
2.3.2A SYSTEM HARDWARE DEFINITION (AUT)
Definition: The AUT option specifies the system I/O hardware configuration. This is
performed by inserting AUT macros in CIa. PRELIB uses these macros to build the
AUT table. The AUT table and macro is described in section III-5.
Option: A maximum of 50 macros can be inserted. The macros must be inserted in
the order listed below.
Dependency: One macro is required for each I/O unit in the system.
I
Release value: The release version contains 26 macros that define the system on which
MSOS 5 was developed and tested.
Deck and COSY numbers:
DELETE/
295,320
AUT (parameters) - Library device
AUT (parameters)
- Console typewriter
AUT (parameters)
- Input unit
AUT (parameters)
- Output unit
AUT (parameters) - Punch unit
AUT (parameters) I
Other I/O units
in any order
AUT (parameters)
CIa DECK/ pl,p2
II-2-20 60410800 D