Table of Contents
Advertisement
7.2.7 POSITION/
PLIBEDIT positions the current PLIBEDIT file (CPF) to the specified deck or
control card.
x
7.2.8 FILE/
POSITION/
POSITION/
y
NOTE
TRA card of deck X is located.
Preceding decks or cards, including the
TRA card, are skipped.
Control card Y is located and preceding
decks or cards including control card Y
are skipped.
The CPF is positioned on the next control
card or IDC card.
PLIBEDIT accepts decks from mass storage files.
x
FILE/
F
FILE/
F
7.2.9 UNIT /
Deck X is accepted from file ordinal
F and is inserted at current location of
NPF.
CPF location remains unchanged.
Input is accepted from file ordinal F
until an end-of-file is encountered.
Input
is inserted at current location of NPF.
CPF location remains unchanged.
PLIBEDIT accepts decks from magnetic tape units.
X
UNIT/
UNIT/
7.2.1 0 COMMENT /
U
U
Deck X is accepted from LUN U and is
inserted at current location of NPF.
CPF location remains unchanged.
Input is accepted from LUN U until an
end-of-file is encountered.
Input is
inserted at current NPF locations.
CPF
position remains unchanged.
PLIBEDIT provides a means of communication between programmer and a PLIBEDIT
history output.
The information given as the Y field is displayed on the standard output
unit.
Y may be 1 through 52 BCD characters.
COlVllVIENT/
Y
III-7-4
60410800 A
Advertisement
Table of Contents
Need help?
Do you have a question about the 3170 and is the answer not in the manual?
Questions and answers