Table of Contents
Advertisement
Message:
D PLIBEDIT 006 IRRECOVERABLE READ ERROR LUN xx
Significance:
Unit is down or operation is abandoned as a result of a read error on
logical unit xx.
Action:
In response to error recovery message, operator typed D, down or A, abandon.
Message:
I PLIBEDIT 007 CARD CHECKSUM ERROR W. C.
=
xx, A. F.
=
xxxxx.
Significance:
Checksum error on card with word count xx and address field xxxxx.
Action:
Correct error condition.
Message:
I PLIBEDIT 008 CHECKSUM ERROR IN ABOVE DECK
Significance:
Checksum error in last deck named.
Action:
Correct error condition.
Message:
D PLIBEDIT 009 Y -FIELD ERROR-RUN ABORTED
Significance:
Illegal Y field in last control card printed.
Action:
Correct Y field on control card.
Message:
I PLIBEDIT 010 FORGOTTEN JOB CARD-IGNORED
Significance:
A JOB card is part of input data.
Card is ignored.
Action:
Remove card before next run.
Message:
I PLIBEDIT 011 FORGOTTEN BLANK CARD-IGNORED
Significance:
A blank card is part of data.
Card is ignored.
Action:
Remove card before next run.
Message:
D PLIBEDIT 012 UNIDENTIFIABLE CARD-RUN ABORTED
Significance:
BCD card unidentifiable.
Run aborts.
Action:
Identify correctly or remove before next run.
Message:
I PLIBEDIT 013 FORGOTTEN EOF CARD-IGNORED
Significance:
An end-of-file card is part of data.
Card is ignored.
Action:
Remove card before next run.
Message:
D PLIBEDIT 014 REQUESTED C. C/DECK NAME CANNOT BE FOUND-RUN
ABORTED.
Significance:
Last control card or deck name printed before diagnostic cannot be found
on current PLIBEDIT file.
Run is aborted.
Action:
Check deck name spelling.
Reassemble.
Message:
D PLIBEDIT 015 lVCHANGE TABLE OVERFLOW-RUN ABORTED
Significance:
Mlltiple change table has overflowed.
Run aborts.
Action:
Maximum number of change decks has been exceeded.
Message:
D PLIBEDIT 016 UNIDENTIFIED UNIT xx
Significance:
Unit xx is not equipped, assigned, or opened.
Run
aborts.
Action:
Equip,
assign.
or open the unit.
Message:
D PLIBEDIT 017 ILLEGAL BLOCK SIZE FOR UNIT Ox
Significance:
The mass storage file for NPF is out of range;
it
must be 512 through
1280 characters.
Run aborts.
Action:
Reallocate the file.
Message:
.
BLOCKED
I PLIBEDIT 018 OUTPUT TAPE IN UNBLOCKED FORMAT
Significance: Informs operator of format of output tape.
Action:
None.
60410800 A
III-7-7
Advertisement
Table of Contents
Need help?
Do you have a question about the 3170 and is the answer not in the manual?
Questions and answers