Table of Contents
Advertisement
7.2.11 REWIND/
REWIND/
C PF is rewou nd
7.2.12 ENDEDIT/
PLIBEDIT continues process of input with the preceding control cards until an ENDEDIT /
card is encountered.
Input from CPF, at its current position, is copied onto NPF until
an end-of-file is encountered.
Control is returned to PLIBEDIT.
ENDEDIT /
7.2.13 MACRO/
PLIBEDIT inserts or deletes macro sets or macro decks, and copies from the standard
input (INP) to NPF up to the next PLIBEDIT control card.
In the descriptions that
follow, the term macro set refers to a
Z
MACRO, Z name card, BCD cards, and an
I
END card.
The term macro deck refers to an individual macro within a macro set,
and includes a macro header card and data through an ENDM macro terminator card.
The term macro deck applies only to .COMPASS macros; COBOL macros are always
considered sets.
MACRO/
MACRO, Z
x
MACRO/
MACRO,Z
MACRO/
x
x
MACRO/
Z
MACRO/
60410800 B
Macro set with name Z is deleted.
If
the set is to be ..deleted and replaced, a
macro set must follow on INP.
Macro deck X is deleted in macro set Z.
BCD cards that follow on INP are copied
to NPF up to the next PLIBEDIT control
card.
IDC card X is located on CPF and the
macro set following on INP is inserted
before IDC card X.
The macro deck following on INP is
inserted before macro deck X in macro
set Z.
The macro set following on INP is inserted
on NPF at the current position.
The X
and Z field of the MACRO / control are
blank.
If the current position of NPF is
in a macro set from a previous deck
operation, the remainder of the macro
set is copied from CPF to NPF.
Then
the macro set on INP up to the next
PLIBEDIT control card is copied to
NPF.
III-7 - 5
Advertisement
Table of Contents
Need help?
Do you have a question about the 3170 and is the answer not in the manual?
Questions and answers