Control Data 3170 Installation Handbook page 246

7.2.5 LOCATE/
PLIBEDIT locates the current PLIBEDIT file to the specified deck. control card. or n
number of end-of-files.
x
x
7.2.6 SKIP/
LOCATE/
LOCATE/
y
LOCATE/
EOF=n
LOCATE/ n
LOCATE/ n
NOTE
TRA card of deck X is located and all
preceding decks or cards including the
TRA card are copied onto NPF.
Control card Y is located and preceding
decks or cards are copied onto NPF.
Card Y is copied onto NPF. Y must be
1 through 20 BCD characters or numbers,
excluding column 1.
Locate CPF past n end-of-files. The
value of n must be 1 through 9.
TRA card of deck X plus n card images
are located. Preceding decks or cards
are copied onto NPF. Card n is copied
onto NPF. The value of n must be
1 through 99.
Locate n card images. The value of n
must be 1 through 99. Preceding decks
or cards and card n are copied onto NPF.
LOCATE/ does not locate cards within a
macro set.
PLIBEDIT skips cards or skips cards following a specified deck.
X
60410800 A
SKIP/
n
SKIP/
n
NOTE
Skip n cards.
1 through 99.
card n
+
1.
The value of n must be
CPF is ready to process
Locate to TRA of deck X and skip n
cards at that point. TRA card of deck
X is copied onto NPF with all preceding
decks or cards. CPF is ready to process
card n
+
1.
SKIP / does not skip cards within a macro set.
III-7-3