Table of Contents
Advertisement
The following is the procedure for assembling the COSY decks and modifying the auto-
load routine through the card reader.
1.
Mount the COSY tape containing the MSOS 5.1 system routines.
I
2.
Assemble and execute COSY deck TWOCDLDR (first deck on the tape).
This_
step produces a set of 2-card loader cards on logical unit 62.
3.
Assemble COSY deck AUTOLOAD, with binary output to logical unit 62.
4.
Place the 2-card loader cards followed by the binary deck of AUTOLOAD in
the card reader.
5.
Use the MSOS 4.2 card reader autoload routine to read and execute the loader
cards and binary deck.
Whichever method is used to modify the autoload routine, the following messages appear
on the console.
SYSTEM CHANNEL =
Type the channel number for the system pack; one digit (for example, 2)
EQUIP NO. =
Type the equipment number for the system pack; one digit (for example, 0)
UNIT NO. =
Type the unit number for the system pack; two digits (for example, 10)
DEVICE TYPE=
Type the system device type (853,854, etc.)
When processing is completed, the system types:
AUTOLOAD HAS BEEN CHANGED
60410800 D
11-1-3
I
Advertisement
Table of Contents
Need help?
Do you have a question about the 3170 and is the answer not in the manual?
Questions and answers