Updating Msos 5.0 To Msos - Control Data 3170 Installation Handbook

1.4 UPDATING MSOS 5.0 TO MSOS 5.1
The following is a summary of the procedural steps necessary to update an MSOS 5.0
system to MSOS 5. 1.
1. Prepare a COSY correction file for the system installation options.
2. Use COSY and COMPASS to change and reassemble the decks containing options
to be changed for the system.
3. Refer to section 4 and use PLIBEDIT to add reassembled COSY decks and de-
lete unused decks and flag cards from the PRELIB source tape (tape A-U.
NOTE
Because of differences in linking certain routines,
MSOS 5. 1 PRELIB must be placed on the MSOS 5. 0
library or on an auxiliary library. (Refer to the
MSOS Version 5 Reference Manual for details re-
garding auxiliary libraries and AUX cards.)
4. Run PRELIB to generate the final library (section III-8).
5. Autoload the final library.
6. Run the verification tests (section 6).
7. Add the product set members such as PERT TIME required by the installation
(section 5).
60410800 D
CAUTION
When MSOS 5.1 and MSOS 5.0 operating systems are
both used on the same computer system, do not leave
class-R packs online when going from version 5. 1 to
version 5.0.
II-1-5