Control Data 3170 Installation Handbook page 218

4.2.9 LGEN
The LGEN statement punches I-card loader cards. These cards are useful for running
I
stand-alone programs; that is, programs capable of running independent of the operating
system.
Card input:
LGEN, lun!, lun2, n
Typewriter input:
LGEN CR lun! CP lun2 NUMBER n
lun! Logical unit number of card reader
lun2 Logical unit number of card punch
n Number of cards to punch
4.2.10 DUMP
The DUMP statement produces a dump file of a designated MSOS library edition in a
format suitable for install processing (INST control statement).
Card input:
DUMP, lun!, lun2, ed
Typewriter input:
DUMP LIB lun! DUMP UNIT lun2 EDITION ed
lun!
lun2
ed
4.2.11 INST
Logical unit number of mass storage containing MSOS library
Logical unit number of unit on which the library is to be dumped.
The unit can only be the card punch or magnetic tape.
Edition of library to be dumped
The INST statement processes the dump file produced by the IU P DU MP function and
installs an MSOS library edition on a designated mass storage device. INST also
allocates and opens the OCAREM files (LABELFILE, IDFILE, and MSDFILE). IUP
I
uses the mfc and msc parameters to calculate the size of these files. Refer to section
I
III-9 for additional information regarding these files. System files 54 through 56 and
L-MSIO are restored with the same sizes and security codes as on the original system.
Card input:
INST, lun!, lun2, ed, dn, mfc, msc, [exid]
604!0800 D
III-4-7